logo
Cohesion Tester
Cohesion Tester
  • Complete to ISSA TB 139
  • Includes:

  • 35 kg-cm torque wrench
  • 6 mm and 10 mm x 60 mm specimen molds (5 each)
  • Cohesion foot with pad
  • Spare rubber foot – 5 each
  • 100 and 220 grit calibration paper (5 each)
  • Ottawa Calibration Sand
  • 100 mm x 100 mm felt squares (100)
  • Double rod end air cylinder 28.5 mm diameter with 8 mm diameter rods and
    76 mm stroke
  • 35 lbs. approximate shipping weight
    14 ½” x 10” x 15”
  • All items may be purchased separately
Loaded Wheel Tester
Loaded Wheel Tester
  • Complete per ISSA TB 109 & 147A
  • Includes:

  • Single reciprocating wheel for
    traffic count design
  • Measurement of excess bitumen and multiplayer rutting potential
  • Complete with 20, 24 gauge-mounting plaques
  • .125”, .188”, .250”, .313”, .375”, .375”, .500” x 2” x 15” molds (3.2, 4.8, 6.4, 8.0, 9.5, 12.7 mm)
  • Sand frame and cover
  • .33 HP 115/120 V 60 Hz motor –
    less lead shot weights
  • 235 lbs. approximate shipping weight
    16” x 17” x 56”
Wet Track Abrasion Tester
Wet Track Abrasion Tester
  • Complete per ISSA TB 100 and
    ASTM D3910
  • Modified Hobart N-50 includes:

  • 5-quart mixer with 5-quart mixer bowl, beater, whip, quick clamp mounting base
  • Spun aluminum pan
  • Special design quick-change abrasion head
  • Raised lip specimen mold (1/4”)
  • 30 lb. roofing felt – 10 pieces
  • Hose – 10 pieces and 1 head
  • Squeegee
  • 2 replacement pins
  • 110V / 60 Hz / 1 phase
  • 230V / 50 Hz / 1 phase
  • Please specify voltage
  • 145 lbs. approximate shipping weight
  • 23” x 23” x 23”
  • Modified Hobart HL 120 - 12-quart mixer also available
Emulsion Lab Mill
Emulsion Lab Mill

    Includes:

  • Adjustable concentric waffle grid rotor and stator
  • 6” diameter
  • 1 – liter batch
  • 2 HP
  • 2 stainless steel tanks
  • Thermometer
  • Pipe, valves and base plate
  • 161 lbs. approximate shipping weight
    12” x 22.5” x 36”
  • SPECIFY VOLTAGE REQUIREMENTS
Flexural Tension Tester
Flexural Tension Tester
  • Complete to ISSA TB146
  • Low Temperature Flexural Tension Tester
  • Uses compacted LWT specimen
  • Fits in most American refrigerators
  • 115/230 V 50/60 Hz (specify)
  • Forward – Off – Reverse operation @
    20 mmpm
  • Slip nut, quick manual return
  • 70 lbs. (1/5HP) approximate shipping weight
  • 25” x 13” x 12 1/2”
  • SPECIFY VOLTAGE REQUIREMENTS
Schulze-Breuer Test Machine
Schulze-Breuer Test Machine
  • Complete to ISSA TB144
  • Aggregate, filler-bitumen compatibility
  • Tumbling pill abrasion test machine
  • Includes:

  • 4 pairs (8) tumbling shuttle cylinders
  • 1/6 HP 115/230 V 50/60 Hz
  • 367 lbs. approximate shipping weight
  • 41” x 30” x 27”
  • Also applies to 230 V 50/60 Hz
  • Items below usually required with
    Schulze-Breuer purchase:

  • Schulze-Breuer 40 gram pill molds
    (ram, case , base)
  • Schulze-Breuer constant force
    pneumatic pill press - up to 1 ton capacity
  • 96 lbs. approximate shipping weight
  • 10” x 25” x 16”
  • 40 psi = 2,000 lbs. force
  • Ruck adhesion and integrity procedure baskets (set of 4)
  • Optional –

  • Additional abrasion tube shuttle cylinder assemblies (machine will accept 6 pairs)
Triple Track Test Machine
Triple Track Test Machine
  • Complete to ISSA TB147B
  • Wheel Track Test Machine “Triple Track”
  • Includes:

  • Adjustable moving bed (10”, 12”, 15” stroke)
  • 3 individually controlled pneumatically loaded, interchangeable wheels
    (1” LWT, 2” TRRL, concave grits wheel and 3 positions) for running 3 simultaneous tests on multiplayer slurry 9 or hot mix with listed accessories
  • 22” moving bed also accommodates
    2, 6” x 6” fatigue beams with
    service displacement measurement manual
  • 1 HP, 110/220V, 60 Hz (please specify)
  • 969 lbs. approximate shipping weight
  • 32” x 56” x 60”
  • Hot mix accessories required for
    the Triple Track:

  • 3, 3” x 5” x 15” beam molds
  • 1 compaction foot
  • 1 extrusion cap
  • 4, 1/2 “ sample plates
  • 3 mounting plates – adjustable side end clamps, base plates, 3 hose assemblies w/brackets
  • 2 additional 5” concave aluminum wheels

Contact Us